Used Allison 1000 Transmission for Sale
When an Allison 1000 starts slipping in fifth, flares on a hot grade or throws a TCM code with the trailer still hooked up, the truck stops earning its keep until it is fixed. Duramax owners tend to keep these trucks for hundreds of thousands of miles, which means the transmission is often the first really big repair.
- Used 6L80 & 6L90 Transmission for Sale
- Fraction of Dealer Pricing
- Exact Fitment from Your VIN
- Compare Quotes, Warranty & Docs Side by Side
- Shipping Included in the Quote
- Seller-Backed Warranty Available
FIND YOUR PART NOW!
CONGRATS !
You're Almost Done
The quotes are the next shock. Rebuilt Allison 1000s commonly list from a couple of thousand dollars to well over $5,000 before labor, and built performance units climb higher. For a 10 or 15 year old work truck, that is a serious decision.
A used Allison 1000 transmission for sale from a donor truck is the same Allison-built design that came in your Silverado or Sierra HD, often for a lower upfront price. Used Auto Parts Pro helps you find one. Used Auto Parts Pro is a marketplace that connects buyers with verified independent sellers of used OEM auto parts. UAPP does not own, warehouse, test, warranty, sell, or ship parts directly. Sellers list their own parts, set their own prices, define warranty terms, and ship directly to buyers or repair shops. Send your VIN, request quotes from verified sellers, and compare condition, mileage, warranty terms and delivery before you decide.
Have your VIN ready and request quotes from verified sellers for your Duramax Silverado or Sierra HD.
1. Quick Answer
What it is: The Allison 1000 is a heavy-duty automatic built by Allison Transmission and used behind the 6.6L Duramax diesel in Silverado and Sierra 2500HD and 3500 pickups from 2001 through 2019. It was a 5-speed through 2005 and a 6-speed from 2006.
Typical used price: Roughly $1,200 to $3,500 in seller quotes, depending on year, 2WD or 4WD, PTO option, mileage, and distance. Rebuilt units commonly list from about $2,000 to over $5,000.
Why buyers choose used OEM: A factory-built unit matched to your truck usually costs less than a rebuilt or performance-built Allison, and may be available sooner.
Fitment: VIN-based matching gives strong fitment confidence. It does not guarantee fit in every case, so confirm 5-speed versus 6-speed, 2WD or 4WD, PTO or non-PTO, and the control module.
Warranty and testing: Both vary by seller and by part. Get terms in writing.
How UAPP helps: UAPP connects you with verified independent sellers so you can compare quotes. Shipping is included in the seller's quote unless otherwise stated.
2. Key Takeaways
- Diesel pairing: The Allison 1000 went behind Duramax diesels only. Gas-powered HD trucks used GM's 4L80E in earlier years and the 6L90 later, so confirm which engine your truck has.
- Speed configurations: The 5-speed (2001-2005) and the 6-speed (2006-2019) are different transmissions. Do not treat them as casual swaps.
- Generation updates: Production year matters. The control module, valve body, and wiring changed across generations, so match by VIN and tag.
- Drive & PTO variants: 2WD versus 4WD and PTO versus non-PTO are separate configurations with separate part numbers.
- Failure points: Commonly reported problems are the torque converter, the C3 clutch pack, valve body wear, and electrical or module faults. Many owners report normal shifting until close to failure, so ask about fluid condition.
- Pricing structure: Estimated used pricing runs roughly $1,200 to $3,500. Rebuilt units commonly start around $2,000 and can run past $5,000.
- Warranty policies: Warranty terms vary by seller and part. Labor, towing, and fluid are often handled separately.
- Testing transparency: Inspection and testing practices vary by seller. Ask for mileage, photos, condition notes, and any test documentation.
- Shipping & installation: An Allison 1000 weighs about 330 pounds dry, so most orders ship by freight. Shipping is included in the seller's quote unless otherwise stated. Flush or replace the cooler and lines at installation.
3. What Is the Allison 1000 Transmission?
The Allison 1000 is a medium-duty automatic that GM bolted behind its 6.6L Duramax diesel. Allison Transmission designed it for heavier work than the automatics in half-ton trucks, and it earned its place in the Silverado and Sierra HD lineup for almost two decades.
It started as a 5-speed in 2001 and became a 6-speed in 2006, which gave the later version a second overdrive for lower highway rpm. Both versions are electronically controlled and use a lockup converter. They also have an external filter, which is an easy way to spot one.
| Specification | Detail |
|---|---|
| Transmission type | Electronically controlled automatic, 5-speed (2001-2005) or 6-speed (2006-2019), with a lockup torque converter |
| Gear ratios | 1st 3.09, 2nd 1.81, 3rd 1.41, 4th 1.00, 5th 0.71, 6th 0.61 (6-speed only), reverse 4.48 |
| Production years in GM HD pickups | 2001 through 2019; replaced by the Allison-branded 10-speed (10L1000) from the 2020 model year |
| Engine pairing | 6.6L Duramax diesel (LB7, LLY, LBZ, LMM, LML, L5P); an optional unit behind the 8.1L gas V8 in some early trucks |
| Input torque ratings (commonly cited) | About 520 lb-ft (2001-2004), 565 (2005), 650 to 660 (2006-2009), 765 (2010-2016) |
| RPO code | MW7 for the 6-speed in GM HD pickups from about 2007 |
| Weight | About 330 lb dry, around 356 lb with fluid |
| Fluid | Varies by year and application. Dexron VI is commonly cited for GM pickups, and Allison guidance favors its approved TES fluids for commercial use. Confirm before filling. |
| Filtration | Sump filter plus a separate external filter |
| Built | Allison Transmission, Indianapolis, Indiana and Baltimore, Maryland |
4. Does the Production Year Matter?
Yes. Controls, valve bodies, wiring, and calibration changed across the run, and parts do not always carry across generations. Match by VIN and by the tag on the transmission.
| Generation | What to know before ordering |
|---|---|
| 2001-2005 (5-speed) | Behind the LB7 and LLY Duramax. The C3 clutch pack is the most discussed early weak point, and the wiring harness and TCM connector pins are known trouble spots as these trucks age. |
| 2006-2010 (6-speed) | Six speeds arrived with the LBZ, with updated clutch packs. Prognostics software for fluid and filter life arrived around the 2009 model year. The valve body and electronics were revised during this era. |
| 2011-2016 (6-speed) | Behind the LML Duramax. The valve body was redesigned around 2010-11 with new trim and mainline pressure solenoids, and the torque rating rose. |
| 2017-2019 (6-speed) | The final years behind the L5P Duramax before the 10-speed replaced it. Match calibration and control module by VIN and tag. |
5. Which Trucks Use an Allison 1000?
The Allison 1000 went into Duramax-powered Silverado and Sierra 2500HD and 3500 pickups from 2001 through 2019, with a few commercial and early 8.1L applications. Gas-powered HD trucks used different transmissions, so confirm by VIN.
| Vehicle | Engine pairing | Approximate years | Buyer note |
|---|---|---|---|
| Chevrolet Silverado 2500HD and 3500 (HD) | 6.6L Duramax diesel | 2001 to 2019 | 5-speed through 2005, 6-speed from 2006. 2WD and 4WD units are different. |
| GMC Sierra 2500HD and 3500 (HD) | 6.6L Duramax diesel | 2001 to 2019 | Shares the transmission with the Silverado HD. |
| Silverado and Sierra 2500HD and 3500 with 8.1L gas | 8.1L V8 (optional Allison) | About 2001 to 2006 | Some trucks used the Allison, others a 4L80E. Confirm by tag and VIN. |
| Chassis cab and commercial applications | Varies | Varies | Allison 1000 variants also appear in chassis cabs and other commercial vehicles. Part numbers differ. |
| Hummer H1 and select other applications | Varies | Late period | Same family, different configuration. Ask about the case and output. |
Common mix-ups: A 6.0L gas Silverado 2500HD does not use an Allison. Earlier ones used a 4L80E, and later ones used a 6L90. A 2020 or newer Duramax HD truck uses the 10-speed 10L1000, a different transmission. If a listing does not match what your truck came with, ask why.
6. Benefits of Buying a Used OEM Allison 1000
- Lower upfront cost: A used OEM unit often costs less than a rebuilt or performance-built Allison before labor. Pricing is competitive vs. dealer parts, and the exact gap depends on the seller and the unit.
- Built for your truck: A donor-truck Allison has the right case, valve body, and control setup for its application. With this many configurations, that matters.
- Availability on older trucks: A lot of Allison-equipped Duramax trucks are now old enough that dealer-new and remanufactured stock can be thin. Donor units can fill gaps.
- Known, proven design: The Allison 1000 ran in GM heavy-duty pickups for almost two decades. Rebuilders know it, parts are available, and many shops have worked on one.
- Seller choice and transparency: Listings can include OEM, remanufactured, and aftermarket-rebuilt units. Seeing them side by side lets you choose on price, condition, mileage, and warranty.
7. How Much Does a Used Allison 1000 Transmission Cost?
Estimated seller quotes for a used OEM Allison 1000 run roughly $1,200 to $3,500, with rebuilt units commonly starting near $2,000 and performance-built units reaching past $6,000. Where you land depends on a handful of things.
| Option | Estimated price range | What to know |
|---|---|---|
| Used OEM Allison 1000 | $1,200 - $3,500 | Donor unit. Price moves with year, 2WD or 4WD, PTO option, mileage, converter, and freight. Listed used examples start near $1,150 to $1,200. |
| Rebuilt or remanufactured Allison 1000 | $2,000 - $5,000+ | Rebuilder-defined process. Listed examples run from about $2,000 into the high $4,000s and $5,000s. Ask what was replaced. |
| Performance-built Allison 1000 | $4,400 - $6,500+ | Upgraded internals for towing or power. Often more than a stock-duty truck needs. |
8. Fitment and Compatibility: Will It Fit My Silverado or Sierra HD?
An Allison 1000 fits when its speed count, year and generation, 2WD or 4WD setup, PTO option, and control module match your truck. VIN-based matching provides strong fitment confidence but does not guarantee fit in every case. Prior modifications, trim differences, production changes, drivetrain configuration, and installer requirements can affect compatibility.
| Check | Why it matters |
|---|---|
| 5-speed or 6-speed | Different internals and calibration. Match what your truck came with. |
| Model year and engine | LB7, LLY, LBZ, LMM, LML, and L5P trucks use different calibrations and controls. |
| 2WD or 4WD | Output and case details differ. A 4WD truck needs a unit that mates to its transfer case. |
| PTO or non-PTO | Part numbers differ. A truck with a PTO needs the PTO-capable unit. |
| Control module (TCM) | Allison controls changed across generations. Ask whether the TCM is included and whether the truck needs programming or a relearn. |
| Valve body and wiring | Case connector and valve body design vary by generation. Match to your VIN and tag. |
| Torque converter | Factory converters are a common weak point. Ask whether it is included, and its condition. |
| Input shaft and spline | Confirm the input shaft and spline count match your engine and converter. |
| ID tag and serial number | Compare the seller's tag, serial, and part numbers to your current unit. Later units may not show the model number, so serial matters. |
Common Buyer Mistakes
- Treating the 5-speed and 6-speed as interchangeable.
- Ordering a 2WD unit for a 4WD truck, or a non-PTO unit for a PTO truck.
- Assuming any year will work. Controls and valve bodies are generation-specific.
- Expecting an Allison in a gas HD truck. Those used other transmissions.
- Skipping the converter question until installation day.
9. Common Allison 1000 Problems and Warning Signs
Most reported Allison 1000 problems come down to heat and load acting on a few known weak points: the factory torque converter, the C3 clutch pack, the valve body, and the electronics. The table lists what rebuilders commonly report.
| Symptom or failure area | What rebuilders commonly report | What it means when buying used |
|---|---|---|
| Converter slip or shudder | The factory torque converter is widely called the biggest weak link, especially under towing loads | Ask whether the converter is included and what condition it is in. |
| Flare or slip under load | C3 clutch pack wear. It gets lubrication mainly when applied | Ask about shift complaints in the donor and any fluid or debris notes. |
| Harsh or erratic shifts | Valve body valve seizure or bore wear | Ask whether the valve body was serviced or is original. |
| Limp mode or lost communication | TCM, wiring, or connector faults, including backed-out pins on early units | Electrical faults can mimic an internal failure. Ask for codes, if known. |
| Overheating signs | Heat from towing, stop-and-go, or a weak cooler | Ask about the donor's work history. |
| Normal shifts, then sudden failure | Many owners report few warning signs before failure | Ask for fluid condition, mileage, and any service history. |
A shift complaint or a code does not always mean a full replacement. Wiring, connectors, fluid, and the control module can produce similar symptoms. Have the truck diagnosed before you commit.
10. Condition, Inspection, and Quality: What to Ask
Inspection and testing practices vary by seller and part category. Ask the seller for mileage, condition notes, photos, and available test documentation before ordering.
- What are the donor truck's year, mileage, engine, and drivetrain?
- Is it a 5-speed or 6-speed, 2WD or 4WD, PTO or non-PTO?
- What do the tag and serial number say?
- Is the torque converter included, and what condition is it in?
- Is the control module included, and does it match the generation?
- Are there photos of the unit and the tag? Any fluid or pan notes?
- Is there any test documentation or donor-vehicle history?
- What are the warranty terms, and what is excluded?
11. Warranty Information
Many sellers offer warranty coverage on select parts. Warranty terms, duration, exclusions, return procedures, and labor coverage vary by seller and part. Confirm all terms in writing before purchase.
Terms are set by each seller and not by UAPP. Many warranties cover the part and not labor, towing, or fluid, though this varies. Ask whether coverage depends on professional installation, and whether the converter or control module is included in coverage. Returns are seller-defined. Contact the seller directly using your order confirmation.
12. Shipping Information
Shipping costs are included in the seller's quote unless otherwise stated. Delivery timelines vary by seller location, part type, carrier availability, freight requirements, and destination.
An Allison 1000 weighs about 330 pounds dry, so most orders ship as freight on a pallet. A commercial address or repair shop with a liftgate makes delivery easier. Alaska, Hawaii, and other oversized or special deliveries may need separate confirmation. Look the unit over on arrival and note any damage on the delivery receipt before signing.
13. Buying Guide: How to Request the Right Transmission
- Confirm what you have now: Note the year, engine, 2WD or 4WD, PTO or non-PTO, and the tag and serial number on your current transmission.
- Send your VIN: This is the best starting point for a transmission that fits.
- Compare quotes: Look at price, donor mileage, warranty, converter and control module, and delivery window side by side.
- Ask about condition and documentation: Use the questions above. Get mileage and photos in writing.
- Confirm fitment details: Match the tag and part numbers on the quote to your current unit before ordering.
- Plan the install: Line up a shop, the cooler flush, the fluid, and any control module programming before the transmission arrives.
14. Installation Considerations
- Professional installation recommended: At about 330 pounds, the transmission needs a lift and a proper transmission jack. Small mistakes show up as slipping or shudder a few hundred miles later.
- Flush the cooler and lines: If the old unit failed internally, debris stays in the cooler. Flush or replace the lines, and consider an auxiliary cooler if the truck tows.
- Match the torque converter: Many installers replace the factory converter with a new transmission. Confirm the converter fits your engine and the input shaft.
- Match the control module: Controls differ by generation, and programming or an adaptive relearn may be needed. Requirements vary by year, module, and application.
- Check the wiring: On early trucks, inspect the harness and connector pins, which are known trouble spots.
- Use the right fluid and filters: Replace both the sump filter and the external filter, and confirm the fluid spec for your year with your installer.
15. Maintenance Tips to Protect a Replacement Transmission
- Heat is the Allison's main enemy, and a Duramax that tows makes plenty of it.
- Follow the severe-duty fluid and filter schedule if you tow or haul.
- Keep the cooler clean, and address any slip or flare early.
- Fresh fluid and a healthy cooling system do more for transmission life than any other step.
16. Used vs. Rebuilt vs. Performance-Built Allison 1000
| Factor | Used OEM | Rebuilt / remanufactured | Performance-built |
|---|---|---|---|
| Estimated price | $1,200 - $3,500 | $2,000 - $5,000+ | $4,400 - $6,500+ |
| Who builds it | Allison at the factory, removed from a donor | A rebuilder, with parts chosen by that rebuilder | An aftermarket builder, with upgraded internals |
| History known | Depends on donor record and seller notes | Rebuilt; prior history usually not tracked | New or upgraded components; no service history |
| Warranty | Seller-set; many sellers offer coverage on select units | Seller or rebuilder-set; terms vary | Builder-set; terms vary |
| Best fit | Stock-duty truck where cost matters | Owners who want internals refreshed | Heavy towing, tuned trucks, or long-term builds |
17. Why Choose Used Auto Parts Pro
- Verified seller network: UAPP connects you with verified independent sellers and salvage yards.
- VIN matching: Strong fitment confidence from VIN-based matching, with a reminder to confirm the tag and serial yourself.
- Nationwide reach: Sellers across the country mean more chances to find the right generation and configuration.
- Transparent comparison: Seller quotes let you compare mileage, condition, warranty, and delivery in one place. Shipping is included in the quote unless otherwise stated.
- Seller-backed warranties: Many sellers offer coverage on select parts. Terms are set by each seller.
- Duramax truck focus: The guidance on this page reflects the Silverado and Sierra HD applications.
18. Frequently Asked Questions
1. What is the Allison 1000 transmission?
The Allison 1000 is a heavy-duty automatic built by Allison Transmission and used behind the 6.6L Duramax diesel in Chevrolet Silverado and GMC Sierra 2500HD and 3500 pickups from 2001 through 2019.
2. Which trucks use an Allison 1000?
Duramax-powered Silverado and Sierra 2500HD and 3500 pickups from 2001 through 2019, plus some early 8.1L gas trucks and certain chassis cab and commercial applications. Gas-powered HD trucks otherwise used a 4L80E or a 6L90. Confirm by VIN.
3. What is the difference between the 5-speed and the 6-speed?
The 5-speed was used from 2001 through 2005. The 6-speed arrived in 2006 and adds a second overdrive. They have different internals and calibrations, so they are not casual swaps.
4. When did GM stop using the Allison 1000?
Through the 2019 model year. Duramax HD trucks moved to the Allison-branded 10-speed (10L1000) from 2020, which is a different transmission.
5. How much does a used Allison 1000 cost?
Estimated seller quotes run about $1,200 to $3,500, depending on year, 2WD or 4WD, PTO option, mileage, and freight distance. All prices are estimates. Final pricing depends on seller availability, part condition, mileage, location, shipping requirements, and market demand.
6. Is a used Allison 1000 better than a rebuilt one?
Neither is automatically better. A used OEM unit often costs less and keeps the factory build. A rebuilt unit has refreshed internals, but quality depends on the rebuilder. Compare price, condition notes, and warranty terms.
7. What are the common Allison 1000 problems?
Rebuilders most often point to the factory torque converter, C3 clutch wear, valve body seizure or bore wear, and electrical or TCM faults. Heat from towing speeds up most of them.
8. Why does the C3 clutch fail?
Rebuilders note that the C3 clutch pack only receives lubrication when it is applied, and it is commonly cited as the clutch that fails most often in the Allison 1000.
9. Does the torque converter come with a used Allison?
It depends on the seller. Some include it and some do not. Ask in writing, and ask about its condition, since the factory converter is a common weak point.
10. Will an Allison from a different year fit my truck?
Sometimes, but not always. Controls, valve bodies, wiring, and calibration changed across generations. A seller using your VIN can narrow it down. VIN-based matching provides strong fitment confidence but does not guarantee fit in every case. Prior modifications, trim differences, production changes, drivetrain configuration, and installer requirements can affect compatibility.
11. Does 2WD versus 4WD or a PTO matter?
Yes. 2WD and 4WD units are separate configurations, and PTO and non-PTO units carry different part numbers. Match the unit to your truck.
12. How does VIN matching work?
You send your VIN so the seller can compare the donor to your truck. VIN-based matching provides strong fitment confidence. It does not guarantee fit in every case, so also confirm the tag, serial, and engine pairing.
13. What mileage should I look for?
There is no universal number. Lower mileage helps, but a Duramax that towed daily can be harder on a transmission than a higher-mileage highway truck. Ask for mileage and condition notes.
14. What warranty comes with a used Allison 1000?
Many sellers offer warranty coverage on select parts. Warranty terms, duration, exclusions, return procedures, and labor coverage vary by seller and part. Confirm all terms in writing before purchase.
15. Is shipping included, and how long does it take?
Shipping costs are included in the seller's quote unless otherwise stated. Delivery timelines vary by seller location, part type, carrier availability, freight requirements, and destination. An Allison 1000 weighs about 330 pounds dry, so freight is common. Alaska, Hawaii, and oversized deliveries may need separate confirmation.
16. Does a swapped Allison need programming?
The truck's transmission control module has to match the transmission. Many same-year swaps are straightforward, but some need programming or an adaptive relearn. Requirements vary by year, module, and application.
17. What fluid does an Allison 1000 use?
It depends on the year and application. Dexron VI is commonly cited for GM pickups, and Allison's own guidance favors its approved TES fluids for commercial use. Confirm against your owner's manual and with your installer.
18. Is there a recall on the Allison 1000?
A 2013 GM recall covered 2014 Silverado HD and Sierra HD trucks with the Allison 1000 whose control module had been loaded with the wrong software, a display and calibration issue. GM has also issued service bulletins on the valve body and control module. Check any VIN at nhtsa.gov/recalls.
19. Who handles returns?
Returns are set by the seller. Contact the seller directly using your order confirmation. UAPP may be able to help you work through the process, but it does not process or approve returns.
20. Conclusion
If your Duramax heavy-duty truck needs a transmission, the decision comes down to picking the right speed count and generation and knowing what you are buying. The Allison 1000 is a proven heavy-duty automatic, but it depends heavily on correct generation and calibration matching. Match the year and the engine to your VIN, ask about the converter and history, and compare more than one quote.
Send your VIN to Used Auto Parts Pro and see what verified sellers quote for your Allison 1000. Confirm what is included, and get the warranty and shipping terms in writing before you order.