Used 6L80 & 6L90 Transmission for Sale
A 6L80 that shudders around 45 mph, flares on the 2-3 shift or drops into limp mode rarely fixes itself. Owners of Silverados, Sierras and Tahoes from the late 2000s onward know how it tends to go: a rumble like a road rumble strip, a shop that suggests a fluid flush, and a few weeks later a much bigger repair. Camaro SS owners get the same story in a faster car.
- Used 6L80 & 6L90 Transmission for Sale
- Fraction of Dealer Pricing
- Exact Fitment from Your VIN
- Compare Quotes, Warranty & Docs Side by Side
- Shipping Included in the Quote
- Seller-Backed Warranty Available
FIND YOUR PART NOW!
CONGRATS !
You're Almost Done
Replacement is the expensive end of that story. A remanufactured 6L80 commonly lists in the high $2,000s to over $3,000 before labor, and built performance units cost more. On a truck that is ten or fifteen years old, that is a hard number to swallow.
A used 6L80 or 6L90 transmission for sale from a donor vehicle is the same GM design, often at a lower upfront price. Used Auto Parts Pro helps you find one. Used Auto Parts Pro is a marketplace that connects buyers with verified independent sellers of used OEM auto parts. UAPP does not own, warehouse, test, warranty, sell, or ship parts directly. Sellers list their own parts, set their own prices, define warranty terms, and ship directly to buyers or repair shops. Send your VIN, request quotes from verified sellers, and compare condition, mileage, warranty terms and delivery before you decide.
Have your VIN ready and request quotes from verified sellers for your Silverado, Sierra, Camaro SS or Tahoe.
1. Quick Answer
What it is: The 6L80 and 6L90 are GM's 6-speed, rear-drive-based automatics, introduced around 2006. The 6L80 went behind V8s in 1500-series trucks and SUVs and in cars such as the Camaro SS. The 6L90 is the heavy-duty version for 2500HD and 3500 trucks and big vans.
Typical used price: Roughly $1,500 to $3,200 in seller quotes, depending on which unit, mileage, 2WD or 4WD, and distance. Remanufactured units commonly start around $2,400 to $3,000.
Why buyers choose used OEM: A GM-built unit matched to your drivetrain usually costs less than a remanufactured or new-build transmission, and may be available sooner.
Fitment: VIN-based matching gives strong fitment confidence. It does not guarantee fit in every case, so confirm 6L80 versus 6L90, 2WD or 4WD, production generation, and the control module.
Warranty and testing: Both vary by seller and by part. Get terms in writing.
How UAPP helps: UAPP connects you with verified independent sellers so you can compare quotes. Shipping is included in the seller's quote unless otherwise stated.
2. Key Takeaways
- Unit distinction: The 6L80 and the 6L90 are not interchangeable. The 6L90 is the heavy-duty version, and a 2500HD or 3500 needs the right one.
- Camaro applications: A Camaro with the V6 automatic uses a 6L50, a smaller sibling. The 6L80 is the Camaro SS automatic. Check the RPO code before you shop.
- Generation updates: GM revised the internals across the production run. The control module is built into the valve body and is matched to a generation, so ask which one you are getting.
- Failure points: The most reported failure is torque converter clutch shudder, followed by 3-5-R clutch wear. Ask about the converter and the fluid condition.
- Pricing structure: Estimated used pricing runs roughly $1,500 to $3,200. Remanufactured units commonly start near $2,400 to $3,000.
- Fitment accuracy: VIN matching gives strong fitment confidence, not a guarantee. 2WD versus 4WD and engine pairing change what fits.
- Warranty policies: Warranty terms vary by seller and part. Labor, towing, and fluid are often handled separately.
- Testing transparency: Inspection and testing practices vary by seller. Ask for mileage, photos, condition notes, and any test documentation.
- Shipping & installation: Shipping is included in the seller's quote unless otherwise stated. Plan to flush the cooler and lines at installation.
3. What Are the GM 6L80 and 6L90 Transmissions?
The 6L80 and 6L90 are General Motors' 6-speed automatics for rear-drive and four-wheel-drive vehicles. The "L" is for longitudinal mounting, and the "E" at the end of the full names, 6L80E and 6L90E, is for electronic control. They replaced the long-running 4L60E and 4L80E families and share the same gear ratios, which is why people mix them up.
Compared with the old four-speeds, they add two gears, a wider ratio spread, and a control module built right into the valve body. That helps highway fuel economy and towing manners. It also means a hydraulic or electronic fault inside the unit can have more moving parts behind it.
| Specification | Detail |
|---|---|
| Transmission type | 6-speed automatic, longitudinal, electronically controlled, with a lockup torque converter |
| Gear ratios (both) | 1st 4.03, 2nd 2.36, 3rd 1.53, 4th 1.15, 5th 0.85, 6th 0.67, reverse 3.06 |
| Introduced | Around 2006 for the 6L80, with the 6L90 following as the heavy-duty version |
| Predecessors | 4L60E and 4L65E (6L80); 4L80E and 4L85E (6L90) |
| Successor | 8-speed 8L90 and, later, the 10-speed units |
| Built | GM Powertrain, Toledo, Ohio and Silao, Mexico |
| RPO codes | MYC for the 6L80, MYD for the 6L90 |
| Control module | Transmission electro-hydraulic control module (TEHCM) built into the valve body |
| Converter | 258 mm or 300 mm on the 6L80, depending on application; 300 mm on the 6L90 |
| Rated vehicle weight | 6L80 commonly cited up to about 8,600 lb GVW; 6L90 up to about 15,000 lb GVWR |
| Fluid | Dexron VI; roughly 11 to 13 quarts total, varies by application |
4. 6L80 vs 6L90: What Is the Difference?
The 6L90 is the heavy-duty version of the 6L80. It adds a plate to each clutch pack, uses stronger gearsets and a 300 mm converter, and has a longer case with extra fasteners at the transfer case. GM rates it for much heavier vehicles.
| Feature | 6L80 (MYC) | 6L90 (MYD) |
|---|---|---|
| Typical vehicles | Silverado and Sierra 1500, Tahoe, Yukon, Suburban 1500, Avalanche, Escalade, Camaro SS | Silverado and Sierra 2500HD and 3500, Suburban and Yukon XL 2500, Express and Savana 2500 and 3500 |
| Duty level | Light-duty to mid-duty trucks, SUVs, and performance cars | Heavy-duty work trucks, vans, and towing |
| Clutch packs | Standard plate counts | One extra plate in each clutch pack and stronger gearsets |
| Case | Shorter | Longer, roughly 1.5 inches, and extra fasteners at the transfer case |
| Converter | 258 mm or 300 mm | 300 mm |
| Output shaft | Varies by 2WD or 4WD and application | Splines vary by application; 29 and 36 are commonly cited |
| Can they swap? | Not as a casual substitute | Not as a casual substitute |
5. Does the Production Year Matter?
Yes. GM changed hydraulics, clutches, and pumps during the run, and control modules are matched to a generation. Rebuilders describe parts that will not carry across generations.
| Generation | What to know before ordering |
|---|---|
| Early run (2006-2009 era) | The first-generation units. Early control modules are known for pressure switch problems, and GM updated the clutch housing in mid-2007 to address a no-forward complaint. |
| Mid run | Rebuilders describe major hydraulic, valve train, and friction changes between the first and second generations. Parts and control modules are not interchangeable across them. |
| Later run | Another round of pump and hydraulic changes. The torque converter design also changed around 2014. Match the converter to the unit. |
6. Which Vehicles Use a 6L80 or 6L90?
The 6L80 went into 1500-series Silverado, Sierra, Tahoe, Yukon, and Suburban models and the Camaro SS automatic, among others. The 6L90 went into the 2500HD and 3500 trucks and big vans. Years and engines overlap, so confirm your exact vehicle by VIN.
| Vehicle | Unit and engine pairing (typical) | Approximate years | Buyer note |
|---|---|---|---|
| Chevrolet Silverado / GMC Sierra 1500 | 6L80 with 4.8L, 5.3L, 6.0L, and 6.2L V8s | 2007 to the late 2010s | Many Silverado and Sierra 1500s from about 2014 on have updated internals. Confirm the generation and 2WD or 4WD. |
| Chevrolet Silverado / GMC Sierra 2500HD and 3500 | 6L90 with the 6.0L gas V8 | About 2007 onward, into later years | Duramax diesels used an Allison automatic. This page covers the 6L90 on gas models. |
| Chevrolet Tahoe / GMC Yukon | 6L80 with 5.3L and 6.2L V8s | 2007 to about 2020 | Late 2010s years vary by engine. Some use an 8-speed, so VIN and RPO matter. |
| Chevrolet Suburban / GMC Yukon XL | 6L80 on 1500 models; 6L90 on 2500 models | 2007 to about 2020 | Confirm 1500 or 2500 first. The right unit depends on it. |
| Chevrolet Camaro SS (automatic) | 6L80 (MYC) with the 6.2L V8 | 2010 to 2015 | The V6 Camaro automatic is a 6L50 (MYB), a different unit. Later Camaro generations changed transmissions. |
| Express and Savana 2500 and 3500 | 6L90 | About 2010 onward | Cargo and passenger vans in fleet service. |
| Other GM applications | 6L80 or 6L90 by model | Varies | Escalade, Avalanche, Hummer H2, Corvette, Pontiac G8, and the Cadillac CTS-V also used the family. |
Common mix-ups: A V6 Camaro automatic is a 6L50, not a 6L80. Duramax Silverado HD pickups used an Allison automatic. Some late-2010s trucks moved to 8-speed and 10-speed units. If a listing does not match what your vehicle came with, ask why.
7. Benefits of Buying a Used OEM 6L80 or 6L90
- Lower upfront cost: A used OEM unit often costs less than a remanufactured one before labor. Pricing is competitive vs. dealer parts, and the exact gap depends on the seller and the unit.
- Matched to your drivetrain: A donor-vehicle transmission already has the right case, converter, and control module for its application. That counts for a lot in a family with this many variations.
- Availability on aging trucks: Many 6L80 and 6L90 vehicles are now ten to fifteen years old. Donor units can fill gaps when remanufactured stock is backordered.
- Real-world running history: A seller can tell you the donor's mileage and, in some cases, how it was used. A newly built unit has no such history.
- Seller choice and transparency: Listings can include OEM, remanufactured, and aftermarket-rebuilt units. Seeing them side by side lets you choose on price, condition, mileage, and warranty.
8. How Much Does a Used 6L80 or 6L90 Transmission Cost?
Estimated seller quotes for a used OEM 6L80 or 6L90 run roughly $1,500 to $3,200, with remanufactured units commonly starting around $2,400. Where you land depends on the unit and a few other things.
| Option | Estimated price range | What to know |
|---|---|---|
| Used OEM 6L80 | $1,500 - $3,200 | Donor unit. Camaro SS and 4WD units can sit at the upper end. Price moves with mileage, converter, control module, and freight. |
| Used OEM 6L90 | $1,800 - $3,200 | Heavy-duty application. Listed examples for 6.0L Silverado 3500 units sit in the high $2,000s. |
| Remanufactured or rebuilt 6L80 or 6L90 | $2,400 - $3,500+ | Rebuilder-defined process. Listed examples run from about $2,400 to $3,000 before shipping. Ask exactly what was replaced. |
| New crate or performance-built | $2,300 and up | Availability varies, and built units cost more. Often more than a stock-duty vehicle needs. |
9. Fitment and Compatibility: Will It Fit My Silverado, Sierra, Camaro or Tahoe?
A 6L80 or 6L90 fits when its unit type, drivetrain setup, generation, control module, and converter match your vehicle. VIN-based matching provides strong fitment confidence but does not guarantee fit in every case. Prior modifications, trim differences, production changes, drivetrain configuration, and installer requirements can affect compatibility.
| Check | Why it matters |
|---|---|
| 6L80, 6L90, or 6L50 | Different duty ratings and cases. Match the RPO code (MYC, MYD, or MYB) to your vehicle's current transmission. |
| 2WD, 4WD, or AWD | A 2WD unit has a longer output shaft for a driveshaft yoke. A 4WD unit mates to a transfer case. A 4WD truck needs the matching unit. |
| Production generation | Valve bodies, pumps, clutches, and converters changed through the run. Control modules are matched to a generation. |
| Control module (TEHCM) | It is built into the valve body. Ask whether it is included and whether the vehicle's module needs programming or a relearn. |
| Engine pairing | Converter and calibration can vary by engine. A 5.3L and a 6.2L do not always share the same unit. |
| Torque converter | Confirm the diameter and whether the seller includes it. Converter condition matters in this family. |
| Output shaft and transfer case | Spline counts vary by application. Match the unit to your transfer case or driveshaft. |
| Wiring and connectors | The external harness and connector must match the vehicle. |
| RPO code and tag | Compare the seller's tag, casting, and part numbers to your current transmission. |
Common Buyer Mistakes
- Treating the 6L80 and 6L90 as the same part.
- Buying a 6L50 for a Camaro SS or a 6L80 for a Camaro V6.
- Ordering a 2WD unit for a 4WD truck, or the reverse.
- Assuming any year will work. Control modules and valve bodies are generation-specific.
- Skipping the converter question until installation day.
10. Common 6L80 and 6L90 Problems and Warning Signs
Most reported 6L80 problems start with the torque converter clutch or the hydraulics that feed it. Rebuilders also point to the 3-5-R clutch, the control module, valve body wear, the pump, and heat. The table lists what they commonly report.
| Symptom or failure area | What rebuilders commonly report | What it means when buying used |
|---|---|---|
| Shudder at steady highway speeds | Torque converter clutch lining wear, often described as a rumble-strip feel | The most reported 6L80 issue. Ask whether the converter was replaced and what the fluid looked like. |
| Flare, slip, or missing gears | 3-5-R clutch or wave plate wear, often after heat or pressure loss | Ask about shift complaints in the donor and any fluid or debris notes. |
| Harsh or erratic shifts, limp mode | TEHCM or solenoid faults, valve body wear | The control module is part of the unit. Ask whether it was a known fault. |
| Loss of line pressure | Pump wear, valve body wear, or a leaking circuit | Photos of the pan and filter, plus fluid condition, help. |
| Overheating symptoms | Heat from towing, hauling, or stop-and-go driving | Ask about the donor's work history, especially on trucks that towed. |
| Check engine light with shift complaints | Codes such as P0741 or P0751 point to converter or solenoid circuits | A code alone does not always mean replacement. Diagnose first. |
A shudder, a harsh shift, or a check engine light does not always mean a full replacement. Fluid condition, wiring, and solenoids can produce similar complaints. Have the codes read and the fluid checked before you commit.
11. Condition, Inspection, and Quality: What to Ask
Inspection and testing practices vary by seller and part category. Ask the seller for mileage, condition notes, photos, and available test documentation before ordering.
- What are the donor vehicle's year, mileage, engine, and drivetrain?
- Is it a 6L80 or 6L90, and what is the RPO code on the tag?
- Is the torque converter included, and what condition is it in?
- Is the control module included, and does it match the generation?
- Are there photos of the unit and the tag? Any fluid or pan notes?
- Is there any test documentation or donor-vehicle history?
- What are the warranty terms, and what is excluded?
12. Warranty Information
Many sellers offer warranty coverage on select parts. Warranty terms, duration, exclusions, return procedures, and labor coverage vary by seller and part. Confirm all terms in writing before purchase.
Terms are set by each seller and not by UAPP. Many warranties cover the part and not labor, towing, or fluid, though this varies. Ask whether coverage depends on professional installation, and whether the converter or control module is included in coverage. Returns are seller-defined. Contact the seller directly using your order confirmation.
13. Shipping Information
Shipping costs are included in the seller's quote unless otherwise stated. Delivery timelines vary by seller location, part type, carrier availability, freight requirements, and destination.
A 6-speed transmission is heavy, so most orders ship by freight on a pallet. A commercial address or repair shop with a liftgate makes delivery easier. Alaska, Hawaii, and other oversized or special deliveries may need separate confirmation. Look the unit over on arrival and note any damage on the delivery receipt before signing.
14. Buying Guide: How to Request the Right Transmission
- Know your truck: Find the RPO code on your transmission or service parts label, and note 2WD or 4WD, the engine, and your VIN.
- Send your VIN: This is the best starting point for a transmission that fits.
- Compare quotes: Look at price, donor mileage, warranty, converter and control module, and delivery window side by side.
- Ask about condition and documentation: Use the questions above. Get mileage and photos in writing.
- Confirm fitment details: Match the tag and part numbers on the quote to your current unit before ordering.
- Plan the install: Line up a shop, the cooler flush, the fluid, and any programming before the transmission arrives.
15. Installation Considerations
- Professional installation recommended: This is a job for a qualified shop. The unit is heavy, the work needs a lift and a transmission jack, and small mistakes show up as shudder or slipping a few hundred miles later.
- Replace or flush the converter and cooler: Many installers replace the converter with a new transmission, and the cooler and lines should be flushed so debris does not reach the new unit.
- Use the right fluid: GM specifies Dexron VI. Ask the shop about a full fluid exchange rather than a drain and fill.
- Match the control module: The TEHCM is built into the valve body and is generation-specific. Programming or a relearn may be needed, and requirements vary by year, module, and application.
- 4WD and AWD trucks: Confirm the output shaft, transfer case adapter, and driveshaft.
- Replace wear items: New filter, seals, and speed sensors if in doubt.
16. Maintenance Tips to Protect a Replacement Transmission
- Heat and dirty fluid are the usual enemies. Follow the severe-duty fluid schedule in your owner's manual if you tow, haul, or drive in stop-and-go traffic.
- Address any shudder or flare early.
- A healthy cooling system and fresh fluid do more for transmission life than any other step.
17. Used vs. Remanufactured vs. New Transmission
| Factor | Used OEM | Remanufactured | New Transmission |
|---|---|---|---|
| Estimated cost | $1,500 to $3,200 | $2,400 to $3,500+ | $2,300 and up |
| Origin | Original unit from a donor vehicle | Rebuilt to the supplier's standard | GM or an aftermarket builder |
| Consistency | Varies with donor and mileage | Usually more consistent, varies by supplier | New |
| Warranty | Varies by seller and part | Varies by supplier | Set by GM or the dealer |
| Availability | Varies by seller and version | Depends on core supply | Depends on dealer stock |
| Good fit for | Budget-minded repairs | Buyers who want rebuilt consistency | Towing, power upgrades, or long-term builds |
18. Why Choose Used Auto Parts Pro
- Verified seller network: UAPP connects you with verified independent sellers and salvage yards.
- VIN matching: Strong fitment confidence from VIN-based matching, with a reminder to confirm the RPO code yourself.
- Nationwide reach: Sellers across the country mean more chances to find the right generation and drivetrain.
- Transparent comparison: Seller quotes let you compare mileage, condition, warranty, and delivery in one place. Shipping is included in the quote unless otherwise stated.
- Seller-backed warranties: Many sellers offer coverage on select parts. Terms are set by each seller.
- GM truck and car expertise: The guidance on this page reflects the Silverado, Sierra, Tahoe, and Camaro SS applications.
19. Frequently Asked Questions
1. What are the 6L80 and 6L90 transmissions?
They are GM's 6-speed longitudinal automatics, introduced around 2006. The 6L80 is used in 1500-series trucks, SUVs, and cars such as the Camaro SS. The 6L90 is the heavy-duty version used in 2500HD and 3500 trucks and large vans.
2. What is the difference between the 6L80 and the 6L90?
The 6L90 adds a plate to each clutch pack, uses stronger gearsets, a 300 mm converter, and a longer case. It is rated for heavier vehicles, up to about 15,000 pounds GVWR versus about 8,600 for the 6L80.
3. Which vehicles use a 6L80 or 6L90?
The 6L80 appears in Silverado and Sierra 1500, Tahoe, Yukon, Suburban 1500, Avalanche, Escalade, and the Camaro SS automatic. The 6L90 appears in Silverado and Sierra 2500HD and 3500 gas models, Suburban and Yukon XL 2500, and Express and Savana vans. Confirm by VIN.
4. Can I put a 6L80 in my 2500HD or 3500?
Not as a casual swap. Those trucks use the heavy-duty 6L90. Ask the seller to confirm the unit against your VIN and RPO code.
5. Is the Camaro automatic a 6L80?
On Camaro SS models with the automatic, yes, roughly 2010 to 2015. The V6 Camaro automatic uses a 6L50, which is a different unit. Later Camaro generations changed transmissions.
6. How much does a used 6L80 or 6L90 transmission cost?
Estimated seller quotes run about $1,500 to $3,200, depending on the unit, mileage, 2WD or 4WD, and distance. All prices are estimates. Final pricing depends on seller availability, part condition, mileage, location, shipping requirements, and market demand.
7. Is a used transmission better than a remanufactured one?
Neither is automatically better. A used OEM unit often costs less and keeps the factory build. A remanufactured unit has refreshed internals, but quality depends on the rebuilder. Compare price, condition notes, and warranty terms.
8. What are the most common 6L80 problems?
Rebuilders most often report torque converter clutch shudder, 3-5-R clutch wear, control module and solenoid faults, valve body wear, pump wear, and heat damage from towing.
9. What does torque converter clutch shudder feel like?
A vibration at steady cruising speeds, often described as driving over a rumble strip, that eases when the converter unlocks. It is often misread as an engine misfire or a driveline problem.
10. Should I ask about the torque converter when buying used?
Yes. Ask whether it is included, what condition it is in, and whether the seller has fluid or debris notes. Many installers replace the converter at the same time.
11. Will a 6L80 from a different year fit my vehicle?
Sometimes, but not always. Valve bodies, pumps, clutches, converters, and control modules changed across the run. A seller using your VIN can narrow it down. VIN-based matching provides strong fitment confidence but does not guarantee fit in every case. Prior modifications, trim differences, production changes, drivetrain configuration, and installer requirements can affect compatibility.
12. Does 2WD versus 4WD matter?
Yes. A 2WD unit has a longer output shaft for a driveshaft yoke, and a 4WD unit has a shorter shaft that mates to a transfer case. Match the unit to your drivetrain.
13. How does VIN matching work?
You send your VIN so the seller can compare the donor to your vehicle. VIN-based matching provides strong fitment confidence. It does not guarantee fit in every case, so also confirm the RPO code and engine pairing.
14. What mileage should I look for?
There is no universal number. Lower mileage helps, but a truck that towed daily can be harder on a transmission than a higher-mileage highway vehicle. Ask for mileage and condition notes.
15. What warranty comes with a used 6L80 or 6L90?
Many sellers offer warranty coverage on select parts. Warranty terms, duration, exclusions, return procedures, and labor coverage vary by seller and part. Confirm all terms in writing before purchase.
16. Is shipping included, and how long does it take?
Shipping costs are included in the seller's quote unless otherwise stated. Delivery timelines vary by seller location, part type, carrier availability, freight requirements, and destination. A 6-speed transmission is heavy, so freight is common. Alaska, Hawaii, and oversized deliveries may need separate confirmation.
17. Does a swapped transmission need programming?
The control module is built into the valve body and is matched to a generation. Many same-generation swaps are straightforward, but some need programming or a relearn. Requirements vary by year, module, and application.
18. What fluid does a 6L80 or 6L90 use?
GM specifies Dexron VI. Confirm against your owner's manual and with your installer, and ask about a full fluid exchange at installation.
19. Is there a recall on the 6L80 or 6L90?
No recall specific to these transmissions turned up in research for this page. GM has addressed shudder complaints through service bulletins, which are not recalls. Check any VIN at nhtsa.gov/recalls.
20. Who handles returns?
Returns are set by the seller. Contact the seller directly using your order confirmation. UAPP may be able to help you work through the process, but it does not process or approve returns.
21. Conclusion
If your Silverado, Sierra, Tahoe, or Camaro SS needs a transmission, the decision comes down to picking the right version and knowing what you are buying. The 6L80 and 6L90 are capable six-speeds, but they depend heavily on correct generation and control module matching. Match the code and the engine to your VIN, ask about the converter and history, and compare more than one quote.
Send your VIN to Used Auto Parts Pro and see what verified sellers quote for your 6L80 or 6L90. Confirm what is included, and get the warranty and shipping terms in writing before you order.