Used 68RFE Transmission for Sale
When a 68RFE starts flaring between fifth and sixth, or throws a transmission code with a trailer on the hitch, a Ram Cummins stops being a work truck and becomes a very expensive driveway ornament. The overdrive clutches are the most talked-about weak point on this transmission, and a hot grade with a heavy load is where they tend to show up.
- Used Toyota 2AR-FE and 2GR-FE Engines
- Fraction of Dealer Pricing
- Exact Fitment from Your VIN
- Compare Quotes, Warranty & Docs Side by Side
- Shipping Included in the Quote
- Seller-Backed Warranty Available
FIND YOUR PART NOW!
CONGRATS !
You're Almost Done
Then comes the quote. Rebuilt 68RFEs commonly list from about $5,000 to well over $7,000, and built performance units can run past $13,000 before labor. For a truck that is already paid off, that is a hard number to swallow.
A used 68RFE transmission for sale from a donor truck is the same factory design that came in your Ram 2500 or 3500, often at a lower upfront price. Used Auto Parts Pro helps you find one. Used Auto Parts Pro is a marketplace that connects buyers with verified independent sellers of used OEM auto parts. UAPP does not own, warehouse, test, warranty, sell, or ship parts directly. Sellers list their own parts, set their own prices, define warranty terms, and ship directly to buyers or repair shops. Send your VIN, request quotes from verified sellers, and compare condition, mileage, warranty terms and delivery before you decide.
Have your VIN ready and request quotes from verified sellers for your Ram 2500 or 3500 Cummins
1. Quick Answer
What it is: The 68RFE is a Chrysler-designed 6-speed automatic built for the standard-output 6.7L Cummins in Ram 2500 and 3500 pickups, from mid-2007 through the 2024 model year. High Output 3500 trucks used a different transmission, the Aisin AS69RC.
Typical used price: Roughly $2,500 to $5,500 in seller quotes, depending on year, 2WD or 4WD, mileage, and distance. Rebuilt units commonly list from about $5,000 to $7,500, and performance builds run higher.
Why buyers choose used OEM: A factory-built unit matched to your truck usually costs less than a rebuilt or performance-built 68RFE, and may be available sooner.
Fitment: VIN-based matching gives strong fitment confidence. It does not guarantee fit in every case, so confirm the transmission code, 2WD or 4WD, model year, and control module.
Warranty and testing: Both vary by seller and by part. Get terms in writing.
How UAPP helps: UAPP connects you with verified independent sellers so you can compare quotes. Shipping is included in the seller's quote unless otherwise stated.
2. Key Takeaways
- Engine pairing: The 68RFE went behind the standard-output 6.7L Cummins. High Output Ram 3500 trucks used the Aisin AS69RC, and some trucks used the G56 manual, so confirm what your truck has.
- Build sheet codes: The build sheet code for the 68RFE is DG7. The Aisin shows DF2. A 68RFE is also distinguishable by its smaller pan and external filter.
- Production updates: Production year matters. The 2019 update changed the pump, valve body, and solenoid pack, and controls varied across the run. Match by VIN and tag.
- Drive configuration: 2WD versus 4WD units are separate configurations with separate part numbers.
- Common trouble spots: Commonly reported problems are overdrive clutch wear, the solenoid pack and valve body, and the torque converter. Trucks with added power report more failures.
- Pricing structure: Estimated used pricing runs roughly $2,500 to $5,500. Rebuilt units commonly start near $5,000, and some rebuilders add a core charge.
- Warranty policies: Warranty terms vary by seller and part. Labor, towing, and fluid are often handled separately.
- Testing transparency: Inspection and testing practices vary by seller. Ask for mileage, photos, condition notes, and any test documentation.
- Recall notices: Check your VIN for open recalls. A 2020 to 2023 fluid-leak recall affected some 68RFE trucks, and it is separate from seller warranty terms.
3. What Is the 68RFE Transmission?
The 68RFE is a 6-speed automatic that Chrysler built for the standard-output 6.7L Cummins turbo diesel in Ram 2500 and 3500 pickups. It arrived midway through the 2007 model year and stayed in the lineup through 2024.
It is electronically controlled, uses a lockup torque converter, and has an integrated solenoid pack on the valve body. It also has a separate external filter, which is an easy way to spot one. Sixth gear is a 0.63 overdrive, which keeps engine speed low on the highway.
| Specification | Detail |
|---|---|
| Transmission type | Electronically controlled 6-speed automatic with a lockup torque converter, built by Chrysler (FCA, now Stellantis) |
| Gear ratios | 1st 3.23, 2nd 1.84, 3rd 1.41, 4th 1.00, 5th 0.82, 6th 0.63, reverse 4.44 |
| Production years in Ram HD pickups | Mid-2007 (the 2007.5 model year) through 2024. For 2025, Ram is reported to have moved the 2500 and 3500 to an 8-speed. |
| Engine pairing | Standard-output 6.7L Cummins turbo diesel. Reported ratings: 370 hp and 800 lb-ft for 2013 to 2018, and 370 hp and 850 lb-ft for 2019 to 2024. |
| Build sheet code | DG7 for the 68RFE. DF2 for the Aisin AS69RC. |
| Case | Aluminum |
| Weight | About 263 lb by one published spec. The Aisin is roughly 400 lb. |
| Fluid | ATF+4 is commonly cited. Published guidance lists service at about 120,000 miles under normal use or 60,000 under severe duty. Confirm in your owner's manual. |
| Filtration | Sump filter plus a separate external filter |
4. Does the Production Year Matter?
Yes. Controls, valve bodies, and calibration changed across the run, and the 2019 update brought new pump, valve body, and solenoid pack parts. Match by VIN and by the tag on the transmission.
| Generation | What to know before ordering |
|---|---|
| 2007.5 to 2012 | The first Cummins 6.7L trucks, badged Dodge Ram through 2010 and Ram from 2011. Earlier Cummins calibrations carried lower torque ratings than later trucks. Controls and calibration differ from later years. |
| 2013 to 2018 | The standard-output Cummins moved to 800 lb-ft. High Output Ram 3500 trucks used the Aisin, while 2500s and standard-output 3500s kept the 68RFE. A 2013 to 2018 emissions software recall (67A) is a separate engine calibration matter. |
| 2019 to 2024 | A new generation of HD trucks. The 68RFE was revised with changes to the pump, valve body, and solenoid pack, and the Cummins rating rose to 850 lb-ft. A fluid-leak recall affected some 2020 to 2023 trucks. |
5. Which Ram Trucks Use a 68RFE?
The 68RFE went into Ram 2500 and standard-output Ram 3500 trucks with the 6.7L Cummins and an automatic, from mid-2007 through 2024. The High Output 3500 used a different transmission, so confirm by VIN and build code.
| Vehicle | Engine pairing | Approximate years | Buyer note |
|---|---|---|---|
| Dodge Ram 2500 (diesel, automatic) | 6.7L Cummins turbo diesel | 2007.5 to 2010 | Dodge Ram branding. Confirm by VIN and tag. |
| Ram 2500 (diesel, automatic) | 6.7L Cummins standard output | 2011 to 2024 | Standard-output only. 2WD and 4WD units are different. |
| Dodge Ram 3500 and Ram 3500 (standard output) | 6.7L Cummins standard output | 2007.5 to 2024 | Standard-output trucks only. High Output 3500s use the Aisin AS69RC. |
| Ram 3500 High Output | 6.7L Cummins High Output | About 2013 to 2024 | Not a 68RFE application. Aisin AS69RC instead. |
| Chassis cab and commercial builds | Varies | Varies | Some chassis cab Rams use the 68RFE. Part numbers can differ. |
6. 68RFE, Aisin AS69RC or Something Else?
Ram used several transmissions across its heavy-duty trucks. This table helps you confirm which one your truck has before you request quotes.
| Transmission | Where it appears | How to tell |
|---|---|---|
| 68RFE (build code DG7) | Ram 2500 and standard-output Ram 3500 with the 6.7L Cummins, mid-2007 to 2024 | Smaller case, 15-bolt pan, about 263 lb |
| Aisin AS69RC (build code DF2) | Ram 3500 High Output Cummins only, about 2013 to 2024 | 20-bolt pan, roughly 400 lb. Different part, not a 68RFE substitute. |
| G56 6-speed manual | Some Cummins 2500 and 3500 trucks | Manual shifter and clutch. No relation to the 68RFE. |
| 66RFE and 8-speed (gas trucks) | Gas Ram HD trucks, including the 6.4L Hemi, used a 66RFE and later an 8-speed | Different engine. Do not confuse with a Cummins truck. |
Common mix-ups: A High Output Ram 3500 does not use a 68RFE. A gas Ram HD does not use one either, and neither does a manual-transmission Cummins. For GM heavy-duty diesel trucks, the equivalent transmission is the Allison 1000, which is a different part entirely.
7. Benefits of Buying a Used OEM 68RFE
- Lower upfront cost: A used OEM unit often costs less than a rebuilt or performance-built 68RFE before labor. Pricing is competitive vs. dealer parts, and the exact gap depends on the seller and the unit.
- Built for your truck: A donor-truck 68RFE has the right case, valve body, and control setup for its application. With 2WD, 4WD, and generation differences, that matters.
- Availability on older Cummins trucks: Many 68RFE trucks are old enough that dealer-new stock is thin. Donor units can fill the gap while you decide whether a rebuilt unit makes sense.
- A transmission shops already know: The 68RFE has run in Ram HD trucks for well over a decade. Rebuilders, parts, and shop experience are easy to find.
- Seller choice and transparency: Listings can include OEM, remanufactured, and aftermarket-rebuilt units. Seeing them side by side lets you choose on price, condition, mileage, and warranty.
8. How Much Does a Used 68RFE Transmission Cost?
Estimated seller quotes for a used OEM 68RFE run roughly $2,500 to $5,500, with rebuilt units commonly starting near $5,000 and performance-built units reaching past $13,000. Where you land depends on a handful of things.
| Option | Estimated price range | What to know |
|---|---|---|
| Used OEM 68RFE | $2,500 - $5,500 | Donor unit. Price moves with year, 2WD or 4WD, mileage, converter, and freight. Listed used examples run from about $3,100 to $5,300. |
| Rebuilt or remanufactured 68RFE | $5,000 - $7,500 | Rebuilder-defined process. Listed 2WD examples start near $5,200, and 4WD units run closer to $7,000. Some rebuilders add a core charge of about $1,800. |
| Performance-built 68RFE | $7,000 - $13,000+ | Billet or upgraded internals for heavy towing or added power. Often more than a stock-duty truck needs. |
9. Fitment and Compatibility: Will It Fit My Ram 2500 or 3500?
A 68RFE fits when its model year and generation, 2WD or 4WD setup, build code, and control module match your truck. VIN-based matching provides strong fitment confidence but does not guarantee fit in every case. Prior modifications, trim differences, production changes, drivetrain configuration, and installer requirements can affect compatibility.
| Check | Why it matters |
|---|---|
| 68RFE or Aisin | Ram 3500 High Output trucks use the Aisin AS69RC. Check the build sheet code (DG7 or DF2) before ordering. |
| Model year | Controls, valve bodies, and calibration changed across the run, and 2019 brought pump, valve body, and solenoid pack updates. |
| 2WD or 4WD | Output and case details differ. A 4WD truck needs a unit that mates to its transfer case. |
| Engine and rating | Standard-output Cummins only. Trucks with tuning or added power may need a stronger unit than stock. |
| Control module (PCM or TCM) | Ask whether the truck needs programming or an adaptive relearn after the swap. Requirements vary by year and application. |
| Valve body and solenoid pack | The solenoid pack is an integrated unit on the 68RFE, so ask whether it was original and what condition it is in. |
| Torque converter | Ask whether the converter is included and what condition it is in, since it is a commonly cited weak point. |
| ID tag and serial number | Compare the seller's tag, serial, and part numbers to your current unit. Part numbers vary by year. |
Common Buyer Mistakes
- Ordering a 68RFE for a High Output Ram 3500, which uses the Aisin AS69RC.
- Ordering a 2WD unit for a 4WD truck, or the reverse.
- Assuming any year will work. Controls and valve bodies are generation-specific.
- Skipping the converter question until installation day.
- Reusing a stock-strength unit in a truck that is tuned or tows at its limit.
10. Common 68RFE Problems and Warning Signs
Most reported 68RFE problems come down to heat and load acting on a few known weak points: the overdrive clutches, the solenoid pack and valve body, and the torque converter. Rebuilders have a stake in selling repairs, so treat these as patterns to ask about rather than predictions.
| Symptom or failure area | What rebuilders commonly report | What it means when buying used |
|---|---|---|
| Flare or slip in 5th and 6th | Overdrive clutch wear, widely called the most common major failure, especially under heavy towing | Ask about the donor's work history, mileage, and any fluid or debris notes. |
| Harsh or erratic shifts, codes | Solenoid pack failure or valve body wear, including cross-leaks at the solenoid switch valve bore | Ask whether the valve body and solenoid pack are original or serviced. |
| Converter shudder or overheating | A weak stock converter, lockup problems, and heat under load | Ask whether the converter is included and its condition. |
| Hard launch damage | Low/reverse sprag and input shaft wear, more common on tuned trucks | A donor from a tuned truck deserves extra questions. |
| Leaks and fluid loss | Valve body leaks and, on some 2020 to 2023 trucks, fluid expelled from the dipstick tube | Check recalls by VIN and ask about leaks on the donor. |
| Problems rise with power added | Specialists say failures are far more common on trucks that exceed factory torque | Ask whether the donor truck was tuned or modified. |
A shift complaint or a code does not always mean a full replacement. Low fluid, a failing solenoid pack, wiring, or software can produce similar symptoms. Have the truck diagnosed before you commit.
11. Condition, Inspection, and Quality: What to Ask
Inspection and testing practices vary by seller and part category. Ask the seller for mileage, condition notes, photos, and available test documentation before ordering.
- What are the donor truck's year, mileage, engine, and drivetrain?
- Is it a 2WD or 4WD unit, and what is the build code?
- What do the tag and serial number say?
- Is the torque converter included, and what condition is it in?
- Was the donor truck tuned, modified, or used for heavy towing?
- Are there photos of the unit and the tag? Any fluid or pan notes?
- Is there any test documentation or donor-vehicle history?
- What are the warranty terms, and what is excluded?
12. Warranty Information
Many sellers offer warranty coverage on select parts. Warranty terms, duration, exclusions, return procedures, and labor coverage vary by seller and part. Confirm all terms in writing before purchase.
Terms are set by each seller and not by UAPP. Many warranties cover the part and not labor, towing, or fluid, though this varies. Ask whether coverage depends on professional installation, and whether the converter is included in coverage. Returns are seller-defined. Contact the seller directly using your order confirmation.
13. Shipping Information
Shipping costs are included in the seller's quote unless otherwise stated. Delivery timelines vary by seller location, part type, carrier availability, freight requirements, and destination.
A 68RFE weighs roughly 263 pounds, so most orders ship by freight on a pallet. A commercial address or repair shop with a liftgate makes delivery easier. Alaska, Hawaii, and other oversized or special deliveries may need separate confirmation. Look the unit over on arrival and note any damage on the delivery receipt before signing.
14. Buying Guide: How to Request the Right Transmission
- Confirm what you have now: Note the year, engine, 2WD or 4WD, the build sheet code, and the tag and serial number on your current transmission.
- Send your VIN: This is the best starting point for a transmission that fits.
- Compare quotes: Look at price, donor mileage, warranty, converter inclusion, and delivery window side by side.
- Ask about condition and documentation: Use the questions above. Get mileage and photos in writing.
- Confirm fitment details: Match the tag and part numbers on the quote to your current unit before ordering.
- Plan the install: Line up a shop, the cooler flush, the fluid, and any control module programming before the transmission arrives.
15. Installation Considerations
- Professional installation recommended: The transmission needs a lift and a proper transmission jack, and small mistakes show up as slipping or shudder a few hundred miles later. One published kit lists about 9 hours of install time.
- Flush the cooler and lines: If the old unit failed internally, debris stays in the cooler. Flush or replace the lines, and consider an auxiliary cooler if the truck tows.
- Match the torque converter: Many installers replace the stock converter with a new transmission. Confirm the converter fits your engine and the input shaft.
- Match the control module: Controls differ by generation, and programming or an adaptive relearn may be needed. Requirements vary by year and application.
- Check the wiring and sensors: Inspect connectors and the harness, since electrical faults can mimic an internal failure.
- Use the right fluid and filters: Replace both the sump filter and the external filter, and confirm the fluid spec for your year with your installer.
16. Maintenance Tips to Protect a Replacement Transmission
- Heat is the 68RFE's main enemy, and a Cummins that tows makes plenty of it.
- Follow the severe-duty fluid and filter schedule if you tow or haul.
- Keep the cooler clean, and address any flare, slip, or code early.
- If you add power, plan for the transmission as well, because added torque is where failures climb.
17. Used vs. Rebuilt vs. Performance-Built 68RFE
| Factor | Used OEM | Rebuilt / remanufactured | Performance-built |
|---|---|---|---|
| Estimated price | $2,500 - $5,500 | $5,000 - $7,500 | $7,000 - $13,000+ |
| Who builds it | Chrysler at the factory, removed from a donor | A rebuilder, with parts chosen by that rebuilder | An aftermarket builder, with upgraded internals |
| History known | Depends on donor record and seller notes | Rebuilt; prior history usually not tracked | New or upgraded components; no service history |
| Warranty | Seller-set; many sellers offer coverage on select units | Seller or rebuilder-set; terms vary | Builder-set; terms vary |
| Best fit | Stock-duty truck where cost matters | Owners who want internals refreshed | Heavy towing, tuned trucks, or long-term builds |
18. Why Choose Used Auto Parts Pro
- Verified independent sellers: UAPP connects you with verified independent sellers and salvage yards.
- VIN matching: Strong fitment confidence from VIN-based matching, with a reminder to confirm the build code, tag, and serial yourself.
- Nationwide reach: Sellers across the country mean more chances to find the right generation and configuration.
- Transparent comparison: Seller quotes let you compare mileage, condition, warranty, and delivery in one place. Shipping is included in the quote unless otherwise stated.
- Seller-set warranties: Many sellers offer coverage on select parts. Terms are set by each seller.
- Ram HD truck focus: The guidance on this page reflects the Ram 2500 and 3500 applications.
19. Frequently Asked Questions
1. What is the 68RFE transmission?
The 68RFE is a 6-speed automatic built by Chrysler for the standard-output 6.7L Cummins in Ram 2500 and 3500 pickups, starting in mid-2007 and running through the 2024 model year.
2. Which trucks use a 68RFE?
Ram 2500 trucks with an automatic and the 6.7L Cummins, plus standard-output Ram 3500 trucks, from mid-2007 through 2024. High Output 3500 trucks use the Aisin AS69RC. Confirm by VIN.
3. How do I tell a 68RFE from an Aisin AS69RC?
Check the build sheet code first. The 68RFE is DG7 and the Aisin is DF2. Physically, the 68RFE has a 15-bolt pan and is smaller, while the Aisin has a 20-bolt pan and weighs roughly 400 lb.
4. When did Ram stop using the 68RFE?
Through the 2024 model year. Ram is reported to have moved the 2500 and 3500 to an 8-speed for 2025, which is a different transmission.
5. How much does a used 68RFE cost?
Estimated seller quotes run about $2,500 to $5,500, depending on year, 2WD or 4WD, mileage, and freight distance. All prices are estimates. Final pricing depends on seller availability, part condition, mileage, location, shipping requirements, and market demand.
6. Is a used 68RFE better than a rebuilt one?
Neither is automatically better. A used OEM unit often costs less and keeps the factory build. A rebuilt unit has refreshed internals, but quality depends on the rebuilder. Compare price, condition notes, and warranty terms.
7. What are the common 68RFE problems?
Rebuilders most often point to overdrive clutch wear, solenoid pack and valve body faults, and the torque converter. Heat from towing and added power speed up most of them.
8. Why do 68RFE overdrive clutches fail?
Specialists note that the overdrive clutches have limited capacity for sustained heavy towing, and heat or a restricted solenoid can starve them of oil flow. They are commonly cited as the most frequent major failure.
9. Does the torque converter come with a used 68RFE?
It depends on the seller. Some include it and some do not. Ask in writing, and ask about its condition, since the stock converter is a commonly cited weak point.
10. Will a 68RFE from a different year fit my truck?
Sometimes, but not always. Controls, valve bodies, and calibration changed across generations, and 2019 brought pump, valve body, and solenoid pack changes. A seller using your VIN can narrow it down. VIN-based matching provides strong fitment confidence but does not guarantee fit in every case. Prior modifications, trim differences, production changes, drivetrain configuration, and installer requirements can affect compatibility.
11. Does 2WD versus 4WD matter?
Yes. 2WD and 4WD units are separate configurations. The 4WD unit has to mate to the truck's transfer case, so match the unit to your drivetrain.
12. How does VIN matching work?
You send your VIN so the seller can compare the donor to your truck. VIN-based matching provides strong fitment confidence. It does not guarantee fit in every case, so also confirm the build sheet code, tag, and serial.
13. What mileage should I look for?
There is no universal number. Lower mileage helps, but a Cummins that towed daily or was tuned can be harder on a transmission than a higher-mileage highway truck. Ask for mileage and condition notes.
14. What warranty comes with a used 68RFE?
Many sellers offer warranty coverage on select parts. Warranty terms, duration, exclusions, return procedures, and labor coverage vary by seller and part. Confirm all terms in writing before purchase.
15. Is shipping included, and how long does it take?
Shipping costs are included in the seller's quote unless otherwise stated. Delivery timelines vary by seller location, part type, carrier availability, freight requirements, and destination. A 68RFE weighs roughly 263 pounds, so freight is common. Alaska, Hawaii, and oversized deliveries may need separate confirmation.
16. Does a swapped 68RFE need programming?
The truck's control module has to match the transmission. Many same-year swaps are straightforward, but some need programming or an adaptive relearn. Requirements vary by year, module, and application.
17. What fluid does a 68RFE use?
ATF+4 is commonly cited. Published guidance lists service at about 120,000 miles under normal use or 60,000 under severe duty. Confirm against your owner's manual and with your installer.
18. Does a tuned truck need a stronger transmission?
Often, yes. Specialists report that failures are far more common on trucks that exceed factory torque. If your truck is tuned or tows at its limit, ask about a rebuilt or performance-built unit as well.
19. Is there a recall on the 68RFE?
Yes, on some trucks. A recall covering certain 2020 to 2023 Ram 2500 and 3500 trucks with the 68RFE involved transmission fluid leaking from the dipstick tube, with a fire risk. Check any VIN at nhtsa.gov/recalls.
20. Who handles returns?
Returns are set by the seller. Contact the seller directly using your order confirmation. UAPP may be able to help you work through the process, but it does not process or approve returns.
20. Conclusion
If your Duramax heavy-duty truck needs a transmission, the decision comes down to picking the right speed count and generation and knowing what you are buying. The Allison 1000 is a proven heavy-duty automatic, but it depends heavily on correct generation and calibration matching. Match the year and the engine to your VIN, ask about the converter and history, and compare more than one quote.
Send your VIN to Used Auto Parts Pro and see what verified sellers quote for your Allison 1000. Confirm what is included, and get the warranty and shipping terms in writing before you order.