Used 545RFE & 45RFE Transmission for Sale
A Ram 1500, Durango or Grand Cherokee that flares between third and fourth, shifts late or drops into limp mode is a familiar story with the 545RFE. These trucks and SUVs are old enough now that the transmission often fails long after the rest of the vehicle has settled into a low, steady value.
- Used 545RFE & 45RFE Transmission for Sale
- Fraction of Dealer Pricing
- Exact Fitment from Your VIN
- Compare Quotes, Warranty & Docs Side by Side
- Shipping Included in the Quote
- Seller-Backed Warranty Available
FIND YOUR PART NOW!
CONGRATS !
You're Almost Done
That is what makes the repair decision hard. Rebuilt 545RFEs commonly list from about $1,600 to $3,000, and performance-built units run higher, before labor. On an older vehicle, that number can land close to what the whole truck is worth.
A used 545RFE or 45RFE transmission for sale from a donor vehicle is the same factory design that came in your Ram, Durango or Jeep, and it often costs less upfront. Used Auto Parts Pro helps you find one. Used Auto Parts Pro is a marketplace that connects buyers with verified independent sellers of used OEM auto parts. UAPP does not own, warehouse, test, warranty, sell, or ship parts directly. Sellers list their own parts, set their own prices, define warranty terms, and ship directly to buyers or repair shops. Send your VIN, request quotes from verified sellers, and compare condition, mileage, warranty terms and delivery before you decide.
Have your VIN ready and request quotes from verified sellers for your Ram 1500, Durango or Grand Cherokee.
1. Quick Answer
What it is: The 45RFE is a Chrysler 4-speed automatic introduced in the 1999 Jeep Grand Cherokee. The 545RFE is the 5-speed version built on the same design, used in Ram 1500, Durango, Grand Cherokee, and related trucks and SUVs from about 2002 through 2011.
Typical used price: Roughly $1,000 to $2,500 in seller quotes, depending on year, engine, 2WD, 4WD or AWD, mileage, and distance. Rebuilt units commonly list from about $1,600 to $3,000.
Why buyers choose used OEM: A factory-built unit matched to your vehicle usually costs less than a rebuilt or performance-built one, and may be available sooner.
Fitment: VIN-based matching gives strong fitment confidence. It does not guarantee fit in every case, so confirm the engine, 2WD, 4WD or AWD setup, model year, and control module.
Warranty and testing: Both vary by seller and by part. Get terms in writing.
How UAPP helps: UAPP connects you with verified independent sellers so you can compare quotes. Shipping is included in the seller's quote unless otherwise stated.
2. Key Takeaways
- Transmission speed distinction: The 45RFE is the 4-speed and the 545RFE is the 5-speed. Rebuilders often list them together, but control programming differs, so match by VIN and tag.
- Engine pairing: These transmissions went behind 4.7L and 5.7L V8 engines. Diesel Cummins Rams use the 68RFE instead, and 2012 and newer vehicles moved to later transmissions.
- Fitment factors: Engine, 2WD, 4WD or AWD setup, and model year all affect fitment. Valve body designs also vary by year.
- Failure points: Commonly reported problems are overdrive and 4C clutch wear, solenoid pack faults, valve body wear, and converter issues.
- Pricing structure: Estimated used pricing runs roughly $1,000 to $2,500. Rebuilt units commonly start near $1,600 and some add a core deposit of about $800.
- Donor background: Donor vehicles are old. Listed examples run from about 123,000 to 223,000 miles, so ask about mileage and condition.
- Warranty policies: Warranty terms vary by seller and part. Labor, towing, and fluid are often handled separately.
- Testing transparency: Inspection and testing practices vary by seller. Ask for mileage, photos, condition notes, and any test documentation.
- Recall notices: No recall or class action specific to the 545RFE turned up in research for this page. Check your VIN for any open campaigns anyway.
3. What Are the 545RFE and 45RFE Transmissions?
The 45RFE is a Chrysler 4-speed automatic that debuted in the 1999 Jeep Grand Cherokee. The 545RFE is the 5-speed version built on the same design, and it ran in Ram, Dodge, and Jeep trucks and SUVs from about 2002 through 2011.
Both are electronically controlled, use a lockup torque converter, and rely on a solenoid pack instead of bands. A second-gear alternate, called 2nd prime, helps the transmission downshift smoothly. Chrysler promoted the design for its wide spread of ratios.
| Specification | Detail |
|---|---|
| Transmission type | Electronically controlled automatic with a lockup torque converter. 4-speed (45RFE) or 5-speed (545RFE). Three planetary gearsets and no bands. |
| Gear ratios (commonly published) | 1st 3.00, 2nd 1.67 (2nd prime 1.50 on kickdown), 3rd 1.00, 4th 0.75, 5th 0.67 (545RFE), reverse 3.00. Published lists vary slightly by source. |
| Production years | 45RFE from 1999. 545RFE from about 2001 or 2002 through 2011, with some sources listing 2012. |
| Engine pairing | 4.7L and 5.7L Hemi V8 engines in most applications |
| Build | Chrysler, at the Kokomo, Indiana transmission plant |
| Fluid | ATF+4 is commonly cited. Confirm in your owner's manual. |
| Pan | 15-bolt pan on the 545RFE |
| Control | Solenoid pack with 6 on/off solenoids and 5 pressure switches, bolted to the valve body |
4. Does the Production Year Matter?
Yes. Valve bodies, solenoid packs, and calibration changed across the run, and so did the engines and drivetrains the transmission was paired with. Match by VIN and by the tag on the transmission.
| Generation | What to know before ordering |
|---|---|
| 1999 to 2001 | The 45RFE debuts in the Grand Cherokee WJ with the 4.7L V8. Some sources describe early solenoids and shift maps that were revised later. |
| About 2002 to 2006 | The 545RFE spreads across Ram 1500, Durango, Grand Cherokee, Dakota, and Liberty. Chrysler added a second overdrive through new shift logic on essentially the same hardware. |
| About 2007 to 2011 | Commander and Aspen join the list. Valve body designs vary, with 5 and 7 check ball versions, so match to your VIN and tag. |
| 2012 and later | Related 6-speeds (65RFE and 66RFE) and then 8-speeds replace the 545RFE. They are different transmissions. |
5. Which Vehicles Use a 545RFE or 45RFE?
The 545RFE went into Ram 1500, Durango, and Grand Cherokee models with V8 engines from about 2002 through 2011, along with several related vehicles. The 45RFE covers the earlier 4-speed years. Confirm by VIN and by the tag.
| Vehicle | Engine pairing | Approximate years | Buyer note |
|---|---|---|---|
| Ram 1500 | 4.7L or 5.7L Hemi V8 | About 2002 to 2011 | 2WD and 4WD units are different. Confirm engine and year. |
| Dodge Durango | 4.7L or 5.7L Hemi V8 | About 2000 to 2011 | 2WD, 4WD, and AWD setups. Match the case and output. |
| Jeep Grand Cherokee | 4.7L or 5.7L Hemi V8 | About 1999 to 2011 | Includes AWD and 4WD. Controls vary by generation. |
| Jeep Commander and Chrysler Aspen | 4.7L or 5.7L V8 | About 2006 to 2010 and 2007 to 2009 | Same family, different configurations. |
| Dodge Dakota, Ram 2500 and 3500 gas, others | Varies | Varies | Dakota, Liberty, and some gas HD Rams also used these. Part numbers differ. |
6. 545RFE or Something Else?
Chrysler used several related transmissions across these years. This table helps you confirm which one your vehicle has before you request quotes.
| Transmission | Where it appears | How to tell |
|---|---|---|
| 45RFE | Early Grand Cherokee, Durango, Dakota, and Ram 1500, from 1999 | 4-speed, with a 2nd prime on kickdown |
| 545RFE | Ram 1500, Durango, Grand Cherokee, Commander, Aspen, and others, about 2002 to 2011 | 5-speed, 15-bolt pan |
| 65RFE and 66RFE | Some 2012 and 2013 trucks and SUVs, including Durango and Grand Cherokee | 6-speeds with different ratios. Not a 545RFE substitute. |
| 68RFE | Ram 2500 and 3500 with the 6.7L Cummins | Diesel only. See the 68RFE page. |
| 8-speed automatics | Newer Ram 1500, Durango, and Grand Cherokee | Different family entirely. |
Common mix-ups: A 2012 or newer Durango, Grand Cherokee, or Ram 1500 may use a 65RFE, 66RFE, or 8-speed instead. A Cummins diesel Ram uses a 68RFE, covered on its own page. Some smaller engines in these vehicles used other automatics, so confirm by VIN and tag.
7. Benefits of Buying a Used OEM 545RFE or 45RFE
- Lower upfront cost: A used OEM unit often costs less than a rebuilt or performance-built 545RFE before labor. Pricing is competitive vs. dealer parts, and the exact gap depends on the seller and the unit.
- Built for your vehicle: A donor-vehicle transmission has the right case, valve body, and control setup for its application. With engine and drivetrain differences, that matters.
- Availability on older vehicles: Dealer-new stock for a transmission this old is thin. Donor units can fill the gap while you decide whether a rebuilt unit makes sense.
- A transmission shops already know: The 545RFE ran in Chrysler, Dodge, and Jeep vehicles for about a decade. Rebuilders, parts, and shop experience are easy to find.
- Seller choice and transparency: Listings can include OEM, remanufactured, and aftermarket-rebuilt units. Seeing them side by side lets you choose on price, condition, mileage, and warranty.
8. How Much Does a Used 545RFE Transmission Cost?
Estimated seller quotes for a used OEM 545RFE or 45RFE run roughly $1,000 to $2,500, with rebuilt units commonly starting near $1,600 and performance-built units reaching past $4,000. Where you land depends on a handful of things.
| Option | Estimated price range | What to know |
|---|---|---|
| Used OEM 545RFE or 45RFE | $1,000 - $2,500 | Donor unit. Price moves with year, engine, drivetrain, mileage, converter, and freight. Listed used examples include a 5.7L 4x4 unit near $1,400. |
| Rebuilt or remanufactured 545RFE | $1,600 - $3,000 | Rebuilder-defined process. Listed examples run from about $1,600 to $2,900. Some add a core deposit of about $800. |
| Performance-built 545RFE | $3,500 - $4,500+ | Upgraded internals and converter packages. Often more than a daily driver needs. |
9. Fitment and Compatibility: Will It Fit My Ram 1500, Durango or Grand Cherokee?
A 545RFE or 45RFE fits when its speed count, model year, engine pairing, 2WD, 4WD or AWD setup, and control module match your vehicle. VIN-based matching provides strong fitment confidence but does not guarantee fit in every case. Prior modifications, trim differences, production changes, drivetrain configuration, and installer requirements can affect compatibility.
| Check | Why it matters |
|---|---|
| 45RFE or 545RFE | 4-speed and 5-speed versions share hardware, but control programming differs. Match what your vehicle came with. |
| Model year | Valve bodies, solenoid packs, and calibration changed across the run. |
| Engine | 4.7L and 5.7L applications use different converters and calibrations. Confirm the engine. |
| 2WD, 4WD, or AWD | Output and case details differ. Match the unit to your transfer case or drivetrain. |
| Control module (PCM or TCM) | Ask whether the vehicle needs programming or an adaptive relearn after the swap. Requirements vary by year and application. |
| Valve body and solenoid pack | Ask whether they are original or serviced. Designs vary, including 5 and 7 check ball versions. |
| Torque converter | Ask whether the converter is included and what condition it is in. |
| ID tag and serial number | Compare the seller's tag, serial, and part numbers to your current unit. Part numbers vary by year. |
Common Buyer Mistakes
- Treating the 45RFE and 545RFE as interchangeable without checking programming.
- Ordering a 2WD unit for a 4WD or AWD vehicle, or the reverse.
- Assuming any year will work. Valve bodies and calibration vary.
- Ignoring the engine. 4.7L and 5.7L applications can differ.
- Skipping the converter question until installation day.
10. Common 545RFE Problems and Warning Signs
Most reported 545RFE problems come down to line pressure and heat acting on a few known weak points: the overdrive and 4C clutches, the solenoid pack and valve body, and the torque converter. Rebuilders have a stake in selling repairs, so treat these as patterns to ask about rather than predictions.
| Symptom or failure area | What rebuilders commonly report | What it means when buying used |
|---|---|---|
| Flare or slip between 3rd and 5th | Overdrive and 4C clutch wear. Low line pressure lets clutches slip and overheat | Ask about donor mileage, fluid condition, and any shift complaints. |
| Limp mode, erratic shifts, codes | Solenoid pack, pressure switch, or wiring faults | Ask whether the solenoid pack was original or serviced. |
| Harsh or delayed engagement | Valve body wear and pump or regulator valve problems | Ask whether the valve body was serviced. |
| Converter shudder or overheating | Converter clutch wear and thermal issues | Ask whether the converter is included and its condition. |
| Minor leaks | Seals, including the shift shaft seal, which has a seal kit | Ask for photos and any leak notes. |
| High mileage on old donors | Donor trucks and SUVs are now 14 or more years old | Listed donor examples run from about 123,000 to 223,000 miles. Ask for mileage. |
A shift complaint or a code does not always mean a full replacement. Low fluid, a failing solenoid pack, wiring, or a sensor can produce similar symptoms. Have the truck diagnosed before you commit.
11. Condition, Inspection, and Quality: What to Ask
Inspection and testing practices vary by seller and part category. Ask the seller for mileage, condition notes, photos, and available test documentation before ordering.
- What are the donor vehicle's year, mileage, engine, and drivetrain?
- Is it a 4-speed or 5-speed, and 2WD, 4WD, or AWD?
- What do the tag and serial number say?
- Is the torque converter included, and what condition is it in?
- Was the donor used for towing or heavy hauling?
- Are there photos of the unit and the tag? Any fluid or pan notes?
- Is there any test documentation or donor-vehicle history?
- What are the warranty terms, and what is excluded?
12. Warranty Information
Many sellers offer warranty coverage on select parts. Warranty terms, duration, exclusions, return procedures, and labor coverage vary by seller and part. Confirm all terms in writing before purchase.
Terms are set by each seller and not by UAPP. Many warranties cover the part and not labor, towing, or fluid, though this varies. Ask whether coverage depends on professional installation, and whether the converter is included in coverage. Returns are seller-defined. Contact the seller directly using your order confirmation.
13. Shipping Information
Shipping costs are included in the seller's quote unless otherwise stated. Delivery timelines vary by seller location, part type, carrier availability, freight requirements, and destination.
A transmission this size usually ships by freight on a pallet. A commercial address or repair shop with a liftgate makes delivery easier. Alaska, Hawaii, and other oversized or special deliveries may need separate confirmation. Look the unit over on arrival and note any damage on the delivery receipt before signing.
14. Buying Guide: How to Request the Right Transmission
- Confirm what you have now: Note the year, engine, 4-speed or 5-speed, 2WD, 4WD or AWD, and the tag and serial number on your current transmission.
- Send your VIN: This is the best starting point for a transmission that fits.
- Compare quotes: Look at price, donor mileage, warranty, converter inclusion, and delivery window side by side.
- Ask about condition and documentation: Use the questions above. Get mileage and photos in writing.
- Confirm fitment details: Match the tag and part numbers on the quote to your current unit before ordering.
- Plan the install: Line up a shop, the cooler flush, the fluid, and any control module programming before the transmission arrives.
15. Installation Considerations
- Professional installation recommended: The transmission needs a lift and a proper transmission jack, and small mistakes show up as slipping or shudder a few hundred miles later. For most owners a repair shop is the safer choice.
- Flush the cooler and lines: If the old unit failed internally, debris stays in the cooler. Flush or replace the lines, and consider an auxiliary cooler if the truck tows.
- Match the torque converter: Many installers replace the converter with a new transmission. Confirm the converter fits your engine and the input shaft.
- Match the control module: Controls differ by generation, and programming or an adaptive relearn may be needed. Requirements vary by year and application.
- Check the wiring and sensors: Inspect connectors and the harness, since electrical faults can mimic an internal failure.
- Use the right fluid and filters: Replace both the sump filter and the external filter, and confirm the fluid spec for your year with your installer.
- 4WD and AWD vehicles: Confirm the output, transfer case adapter, and driveshaft.
16. Maintenance Tips to Protect a Replacement Transmission
- Heat and low line pressure are the 545RFE's main enemies.
- Follow the severe-duty fluid and filter schedule if you tow or haul.
- Keep the cooler clean, and address any flare, slip, or code early.
- Fresh fluid and a healthy cooling system do more for transmission life than any other step.
17. Used vs. Rebuilt vs. Performance-Built 545RFE
| Factor | Used OEM | Rebuilt / remanufactured | Performance-built |
|---|---|---|---|
| Estimated price | $1,000 - $2,500 | $1,600 - $3,000 | $3,500 - $4,500+ |
| Who builds it | Chrysler at the factory, removed from a donor | A rebuilder, with parts chosen by that rebuilder | An aftermarket builder, with upgraded internals |
| History known | Depends on donor record and seller notes | Rebuilt; prior history usually not tracked | New or upgraded components; no service history |
| Warranty | Seller-set; many sellers offer coverage on select units | Seller or rebuilder-set; terms vary | Builder-set; terms vary |
| Best fit | Daily driver where cost matters | Owners who want internals refreshed | Towing, tuned vehicles, or long-term builds |
18. Why Choose Used Auto Parts Pro
- Verified seller network: UAPP connects you with verified independent sellers and salvage yards.
- VIN matching: Strong fitment confidence from VIN-based matching, with a reminder to confirm the tag and serial yourself.
- Nationwide reach: Sellers across the country mean more chances to find the right generation and configuration.
- Transparent comparison: Seller quotes let you compare mileage, condition, warranty, and delivery in one place. Shipping is included in the quote unless otherwise stated.
- Seller-set warranties: Many sellers offer coverage on select parts. Terms are set by each seller.
- Chrysler vehicle focus: The guidance on this page reflects the Ram 1500, Durango, and Grand Cherokee applications.
19. Frequently Asked Questions
1. What is the 545RFE transmission?
The 545RFE is a Chrysler 5-speed automatic, built on the 4-speed 45RFE design. It was used in Ram 1500, Durango, Grand Cherokee, and related vehicles from about 2002 through 2011.
2. Which vehicles use a 545RFE or 45RFE?
Ram 1500, Dodge Durango, Jeep Grand Cherokee, Jeep Commander, Chrysler Aspen, Dodge Dakota, and some gas Ram HD Rams, mostly behind 4.7L and 5.7L V8 engines. Confirm by VIN.
3. What is the difference between the 45RFE and 545RFE?
The 45RFE has four forward speeds and the 545RFE adds a taller fifth. Chrysler added the extra overdrive through new shift logic on essentially the same hardware. Control programming differs, so match by VIN and tag.
4. When did Chrysler stop using the 545RFE?
Around the 2011 model year, with some sources listing 2012. Related 6-speeds and then 8-speeds replaced it, and those are different transmissions.
5. How much does a used 545RFE cost?
Estimated seller quotes run about $1,000 to $2,500, depending on year, engine, drivetrain, mileage, and freight distance. All prices are estimates. Final pricing depends on seller availability, part condition, mileage, location, shipping requirements, and market demand.
6. Is a used 545RFE better than a rebuilt one?
Neither is automatically better. A used OEM unit often costs less and keeps the factory build. A rebuilt unit has refreshed internals, but quality depends on the rebuilder. Compare price, condition notes, and warranty terms.
7. What are the common 545RFE problems?
Rebuilders most often point to overdrive and 4C clutch wear, solenoid pack faults, valve body wear, and converter issues. Low line pressure causes heat that wears the clutches.
8. Why do the overdrive clutches fail?
Specialists note that low line pressure lets clutches slip, and the resulting heat wears the overdrive and 4C clutch packs first. Early signs include delayed engagement and flare between 3rd and 4th or 4th and 5th.
9. Does the torque converter come with a used 545RFE?
It depends on the seller. Some include it and some do not. Ask in writing, and ask about its condition.
10. Will a 545RFE from a different year or engine fit my vehicle?
Sometimes, but not always. Valve bodies, solenoid packs, converters, and calibration changed across years and engines. A seller using your VIN can narrow it down. VIN-based matching provides strong fitment confidence but does not guarantee fit in every case. Prior modifications, trim differences, production changes, drivetrain configuration, and installer requirements can affect compatibility.
11. Does 2WD, 4WD, or AWD matter?
Yes. Output and case details differ, so the unit has to mate to your drivetrain and transfer case. Match the unit to your vehicle.
12. How does VIN matching work?
You send your VIN so the seller can compare the donor to your vehicle. VIN-based matching provides strong fitment confidence. It does not guarantee fit in every case, so also confirm the tag and serial.
13. What mileage should I look for?
There is no universal number. Donors for this transmission are old, and listed examples run from about 123,000 to 223,000 miles. Ask for mileage and condition notes.
14. What warranty comes with a used 545RFE?
Many sellers offer warranty coverage on select parts. Warranty terms, duration, exclusions, return procedures, and labor coverage vary by seller and part. Confirm all terms in writing before purchase.
15. Is shipping included, and how long does it take?
Shipping costs are included in the seller's quote unless otherwise stated. Delivery timelines vary by seller location, part type, carrier availability, freight requirements, and destination. Transmissions ship by freight on a pallet. Alaska, Hawaii, and oversized deliveries may need separate confirmation.
16. Does a swapped 545RFE need programming?
The vehicle's control module has to match the transmission. Many same-year swaps are straightforward, but some need programming or an adaptive relearn. Requirements vary by year, module, and application.
17. What fluid does a 545RFE use?
ATF+4 is commonly cited. Confirm against your owner's manual and with your installer, and ask about replacing the filter.
18. Is a used 545RFE worth it in an older vehicle?
It can be, if the rest of the vehicle is sound. A used OEM unit often costs less than a rebuilt one, which matters when the vehicle's value is modest. Compare quotes and get a shop's opinion before deciding.
19. Is there a recall on the 545RFE?
No recall specific to the 545RFE turned up in research for this page, and no class action either. Vehicles can still have open campaigns for other parts, so check any VIN at nhtsa.gov/recalls.
20. Who handles returns?
Returns are set by the seller. Contact the seller directly using your order confirmation. UAPP may be able to help you work through the process, but it does not process or approve returns.
20. Conclusion
A failing 545RFE is expensive, but it does not have to end the vehicle's life. A used OEM unit from a donor Ram, Durango, or Grand Cherokee can get yours back on the road for less upfront than a rebuilt or performance-built unit, as long as you match the speed count, engine, drivetrain, and control module.
Send your VIN to Used Auto Parts Pro and see what verified sellers quote for your 545RFE or 45RFE transmission. Confirm what is included, and get the warranty and shipping terms in writing before you order.